Regency Railings has developed a new series of prefabricated hand forged decorative ironwork components expressly for home builders and wood stair companies. You now have the opportunity to offer a custom looking forged iron railing without welding at an affordable price.
This innovative balustrade system is our “Builder Collection.” The designs included within this collection were developed to be installed directly into a closed stringer staircase and wooden handrail to eliminate all need for welding. Regency Railings components are not designed to be installed directly into stair treads. If you are still specifying open stringers you now have a reason to change.
Regency Railing engineers all designs to pass the 4″ sphere code and the 2003 IRC rail height requirements when installed in accordance with the layouts depicted within the collection. However, it is the sole responsibility of the builder, stair company, architect, designer, and installer to familiarize themselves and comply with these national building codes and any local code which may differ.
Regency Railings offers components for virtually any staircase regardless of radius or slope and any level railing regardless of radius with the following limitations. Regency Railings components are designed for use on any incline radius greater than 30″ and inclines of 48 degrees or less. The level railing components are designed for a radius greater than 28″. Use on a tighter radius or greater degree of incline might require significant modification to allow installation and to pass codes.
|
|
|
|
|
|
|
|
| Milano with Verticals © 1996 |
|
|
|
|
|
|
|
